ULTRATHIN ABRASIVE CUT-OFF WHEELS
ULTRATHIN ABRASIVE CUT-OFF WHEELS
ULTRATHIN ABRASIVE CUT-OFF WHEELS
- 产品详情
- 产品参数
ULTRATHIN ABRASIVE CUT-OFF WHEELS FOR PRECISION CUTTERS Arbor ½" [12.7mm], Thickness is listed under Part No. Qty 10/BOX | ||
Steel, stainless steel (Al2O3) | ||
| Size | Thickness | Part No. |
| 4in [102mm] | 0.012in (0.3mm) | CT-4F |
| 7in [178mm] | 0.028in (0.7mm) | CT-7F |
| 8in [203mm] | 0.032in (0.8mm) | CT-8F |
| Hard, soft non-ferrous materials (SiC) | ||
| Size | Thickness | Part No. |
| 4in [102mm] | 0.012in (0.3mm) | CT-4N |
| 7in [178mm] | 0.028in (0.7mm) | CT-7N |
| 8in [203mm] | 0.032in (0.8mm) | CT-8N |
| Tool steel, hard steel, HRC45+ (Al2O3) | ||
| Size | Thickness | Part No. |
| 5in [127mm] | 0.016in (0.4mm) | CT-5H |
| 6in [152mm] | 0.03in (0.76mm) | CT-6H |
| Medium hard, soft steel, HRC45- (Al2O3) | ||
| Size | Thickness | Part No. |
| 5in [127mm] | 0.016in (0.4mm) | CT-5S |
| 6in [152mm] | 0.03in (0.76mm) | CT-6S |
ULTRATHIN ABRASIVE CUT-OFF WHEELS FOR ABRASIVE CUTTERS Arbor 1¼" [32mm], Thickness is listed under Part No. Qty 10/BOX | ||
Ferrous materials, HRC45+ (Al2O3) | ||
| Size | Thickness | Part No. |
| 10in [250mm] | 0.032in (0.8mm) | CT-10H |
| 12in [300mm] | 0.032in (0.8mm) | CT-12H |
| General use, HRC45- (Al2O3) | ||
| Size | Thickness | Part No. |
| 10in [250mm] | 0.032in (0.8mm) | CT-10S |
| 12in [300mm] | 0.032in (0.8mm) | CT-12S |
Brand
USA/QMAXIS
Material
AO, SiC
Size
4in，5in，6in，7in，8in；10in，12in
Description
QMAXIS UltraThin abrasive blades are used for metallographic precision cutters and metallographic abrasive cutters. The UltraThin series offers small area of cutting, low surface damage, minimal material loss, and long service life.
