COLD MOUNTING SYSTEMS
COLD MOUNTING SYSTEMS
COLD MOUNTING SYSTEMS
- 产品详情
- 产品参数
| EpoQuick | |||
| Using: Quick mounting | |||
| Cure time: 2 h | Clarity: Clear | Viscosity: Very low | |
| Shore D: 80 | Peak Temp: 230ºF/110ºC | Mixing resin to hardener: 5:1 | |
| Resin | Hardener | ||
| Qty | Part No. | Qty | Part No. |
| 32oz [950ml] | ME-01-032 | 8oz [240ml] | MH-01-008 |
| 1gal [3.8L] | ME-01-128 | 32oz [950ml] | MH-01-032 |
| EpoCure | |||
| Using: General mounting | |||
| Cure time: 6 h | Clarity: Clear | Viscosity: Low | |
| Shore D: 80 | Peak Temp: 104ºF/40ºC | Mixing resin to hardener: 4:1 | |
| Resin | Hardener | ||
| Qty | Part No. | Qty | Part No. |
| 32oz [950ml] | ME-02-032 | 8oz [240ml] | MH-02-008 |
| 1gal [3.8L] | ME-02-128 | 32oz [950ml] | MH-02-032 |
| EpoFlow | |||
| Using: Pore penetration and heat sensitive materials (as PCBs) | |||
| Cure time: 9 h | Clarity: Clear | Viscosity: Low | |
| Shore D: 78 | Peak Temp: 104ºF/40ºC | Mixing resin to hardener: 2:1 | |
| Resin | Hardener | ||
| Qty | Part No. | Qty | Part No. |
| 32oz [950ml] | ME-03-032 | 16oz [470ml] | MH-03-016 |
| 1gal [3.8L] | ME-03-128 | 64oz [1.9L] | MH-03-064 |
| EpoLi-ion | |||
| Using: Lithium batteries | |||
| Cure time: 24h/25℃ or 2h/60℃ | Clarity: Wheat/Khaki | Viscosity: 7000-9000/100-300 | |
| Shore D: 85 | Component: Q1707-1RA/Q5230B | ||
| Mixing resin to hardener: 100:30 | Feature: Resistance to electrolyte corrosion | ||
| Resin | Hardener | ||
| Qty | Part No. | Qty | Part No. |
5kg | ME-04-5 | 5kg | MH-04-5 |
| 10kg | ME-04-10 | 10kg | MH-04-10 |
| AcryQuick | |||
| Using: Fast cure, especially for electronics and PCBs | |||
| Cure time: 8-12 min | Clarity: Translucent | Viscosity: Medium | |
| Shore D: 82 | Peak Temp: 150ºF/65ºC | Mixing resin to hardener: 2:1 | |
| Resin | Hardener | ||
| Qty | Part No. | Qty | Part No. |
| 5lbs [2.3kg] | MA-01-5 | 64oz [1.9L] | MA-01-064 |
| Resin and Hardener Kit | |||
| Qty | Part No. | ||
| Resin 1lb [0.45kg] | MA-01-K | ||
| Hardener 12oz [360ml] | |||
| Graduated mixing cups 10 | |||
| Stirring sticks 10 | |||
Brand
USA/QMAXIS
Compounds
Epoxy Systems, Acrylic Systems
Cure time
8-12min, 2h, 6h, 9h, 24h/25℃ or 2h/60℃
Description
QMAXIS cold mounting systems, including epoxy mounting systems and acrylic mounting systems, have low viscosity, low shrinkage, low peak exotherm, and good pore penetration.
